
When the roller shutter comes down for Winter, the limits of an ‘open door’ approach to welding fume become obvious. General ventilation can help reduce background fume, but it cannot replace effective capture at source. For a busy workshop, that means choosing extraction that works with the way welders move, reach and work.
That is the thinking behind ENGMAR’s ERGOFLOW MIG/MAG and TIGFLOW TIG extraction torches, now available in the UK from Extractability. ENGMAR has spent more than 25 years developing extraction torches and the detail is apparent in both the capture design and the parts the welder handles every day.
Capture that follows the weld
An extraction arm can be an effective control when it is correctly positioned. On jobs with long seams, changing angles or restricted access however, the welder must keep repositioning the hood. An extraction torch moves with the hand, keeping the capture point close to the arc as the weld continues.
The ERGOFLOW range includes the FL 250, FL 360 and FL 400 air-cooled MIG/MAG torches, with water-cooled options for more demanding applications. Interchangeable extraction shrouds allow the torch to be matched to the fume volume and the shape of the workpiece, while a choice of neck angles helps welders get into difficult joints. Extraction is positioned behind the gas nozzle, so the system is designed to capture fume without drawing away the shielding gas.
That flexibility matters when comparing torches. The torch must also reach the weld, capture effectively and remain comfortable throughout the shift.
The details that stand up
ENGMAR has paid particular attention to the points where torches take punishment; The outer extraction hose is its own flexible design. A metal spring protects the rear of the Euro connector from premature wear, while a steel swivel helps the cable assembly follow the welder’s movements and the leather cover protects the front section.
The ERGOFLOW trigger is a robust mechanical design with two sensitivity settings. The front-end assembly is made up with few consumables where mounting is centred during assembly. These are practical details as they make the torch easier to handle and help keep it working consistently no matter the application.
For heavy duty applications, ENGMAR’s water cooled models carry increased cooling through to the contact tip. That helps manage heat where consumables experience it most, supporting longer consumable life and more stable performance during extended periods.
TIG fume is easy to overlook
TIG processes often produces less visible fume than MIG/MAG processes, but visibility is a poor guide to exposure. Depending on the material and conditions, TIG welding can generate hazardous gases and fine particles. ENGMAR’s TIGFLOW air cooled T9, T17 and water cooled T20 bring extraction close to the arc without forcing the welder to work around a separate capture hood.
The torches use wedge collets designed to grip the tungsten electrode without deforming it; ENGMAR states that these can last up to ten times longer than standard collets. The range also offers different controls and front end consumable options to suit the way each TIG station is used.
A torch is part of the control system
Even a well-designed extraction torch needs the right airflow and a suitable extraction system behind it. Extractability can help workshops select the torch and extraction system for the application, then commission the LEV installation. UK requirements call for LEV to be thoroughly examined and tested at least every 14 months, luckily Extractability provide this service too!
For workshops seeking a new torch range, it is vital to ensure the equipment captures fume effectively, works comfortably in the welders hands and holds up to daily use. ENGMAR’s ERGOFLOW and TIGFLOW ranges have been engineered around all three.
www.extractability.co.uk








