
In metal fabrication, the quality of a finished assembly is often determined long before welding begins. Accurate cutting, consistent angles and clean material preparation all contribute to better fit-up, less rework and a more efficient route from stock to finished component.
However, cutting long, heavy or awkward sections can create its own challenges. With a conventional chop saw, producing a mitre often means repositioning the workpiece, a relatively simple task with short lengths, but a considerably less practical one when working with large box section, tube or repeated production cuts.
The Evolution S355MCS Gen 2 Metal Cutting Mitre Saw has been developed around a different approach: ‘move the saw, not the steel’.
Rethinking the mitre-cutting workflow
Rather than requiring the operator to repeatedly reposition the material, the S355MCS Gen 2 uses a rotating saw head capable of making mitre cuts up to 46 degrees in either direction. The material can remain securely clamped in place while the cutting head is adjusted to the required angle.
This approach can simplify the handling of longer stock, reduce the working area needed around the saw and support a more controlled, repeatable cutting process. It is particularly useful when producing frames, supports, railings and other fabricated assemblies involving repeated straight and angled cuts.
The saw’s three-position cutting head and dual front clamps provide additional flexibility when securing different profiles. By holding the material firmly from the front, the system helps the operator maintain control of the workpiece and achieve consistent results across a series of cuts.
Portability has also remained an important part of the S355MCS concept. Although designed to provide a stable cutting platform, the saw can be moved between work areas or taken to site when the material or application makes bringing the work to a fixed machine impractical.
The next generation of cold-cutting performance
The S355MCS Gen 2 builds on this established moving-head format with a series of developments intended to improve cutting performance, accuracy and durability.
At the centre of the new machine is the EVOMAX Performance System, combining an EVOMAX metal-cutting blade with Evolution’s Intelligent Motor Technology. The motor manages blade speed under load, helping the blade work within its optimum cutting conditions and supporting more consistent performance through demanding cuts.
This matters because cutting speed alone does not determine workshop productivity. Blade life, cut quality and the amount of secondary preparation required can have an equally significant effect on the time and cost of a job.
Unlike abrasive cutting, Evolution’s cold-cutting technology removes material with a toothed blade. It produces a clean, cool-to-the-touch finish with minimal burrs and fewer sparks, reducing and often eliminating the need for grinding and allowing cut material to move more quickly to fit-up and welding. Maintaining the correct blade speed helps protect that performance and reduces unnecessary stress on the blade.
Gen 2 also introduces a reinforced platform and fence designed to provide greater stability during cutting. For fabricators working to tight tolerances, a rigid and secure base is essential to maintaining alignment and repeatability, particularly when producing multiple components for the same assembly.
Greater visibility and control
Accurate positioning is supported by Evolution’s Shadow Line cutting guide. Instead of relying on a laser projecting a fixed line, the system casts the blade’s shadow directly onto the workpiece. This shows the position and width of the blade before the cut is made, helping the operator align the material with greater confidence.
Because the guide reflects the blade itself, it remains relevant if the blade or cutting angle is changed. This can be especially useful when switching between straight and mitre cuts or working with different metal profiles throughout the day.
An electronic brake stops the blade quickly after the trigger is released, helping to shorten the pause between cuts and supporting a more controlled working process. A soft-start function further improves control by bringing the blade smoothly up to operating speed.
These developments do not fundamentally change what an experienced fabricator expects from a metal-cutting saw. Instead, they refine the details that influence how efficiently, accurately and consistently the machine can be used across a working day.
The strength of that design has received independent recognition in the United States, where the S355MCS Gen 2 was named a winner in the 2025 Pro Tool Innovation Awards. The accolade reinforces the machine’s position as an important development in professional metal-cutting saw technology.
One platform, built around different fabrication needs
The S355MCS Gen 2 sits at the top of a wider family of Evolution 355 mm metal-cutting saws. Each model shares the cutting capacity and versatility of a 355 mm blade platform but is designed around a different working environment and reason to buy.
The S355CPSL is the accessible entry point into Evolution’s dedicated steel-cutting range. Designed for mobile welders, installers and fabricators who prioritise value and portability, it combines a lighter, compact format with a 2,200 W motor, fast-action clamping and 0–45-degree mitre capability. It is a dependable steel-cutting workhorse for users who need clean, accurate cold cuts without investing in the additional technology of the premium models.
For professional workshops and daily fabrication, the S355CPS Gen 2 places greater emphasis on cutting performance, consistency and blade life. Its EVOMAX blade and Intelligent Motor Technology are supported by Shadow Line alignment, soft start and an electronic brake. It is the straight-cutting specialist for fabricators who want faster, cleaner and more repeatable preparation before fit-up and welding.
The S355CPS-Li takes the same professional capability beyond the fixed workshop. Powered by two 18 V EXT batteries to deliver a 36 V cutting system, it is intended for site welders, steel erectors, maintenance teams and fabricators working where mains power is unavailable or trailing cables are impractical. Its principal advantage is straightforward: full-size cold-cutting capacity with cordless freedom.
For structural fabricators and specialists producing gates, frames, railings and other angled assemblies, the S355MCS Gen 2 adds its distinctive moving-head design. Accurate mitres of up to 46 degrees in either direction can be produced while the steel remains clamped in position, reducing material handling and supporting fast, repeatable fabrication.
The shared 355 mm platform is supported by Evolution’s range of specialist metal-cutting blades. Options developed for mild steel, stainless steel, aluminium and thin steel allow the blade to be matched more closely to the material and application. This reflects Evolution’s broader approach as a metal-cutting specialist: developing the saw, motor and blade as a complete cutting system rather than treating the blade as an interchangeable afterthought.
www.evolutionpowertools.com








