Richard Townsend, Commercial Lead – Friction Stir Welding, Element Six talks to Welding World about how Friction Stir Welding is transforming next-generation heavy-duty steel applications.

For decades, heavy-duty steel structures in sectors such as energy, shipbuilding, pipelines, automotive and aerospace have relied on conventional arc and fusion welding processes. However, this entails significant compromises in distortion, residual stress and defect risk, particularly as plate thicknesses increase and alloys become more complex. As the industry seeks higher productivity, tighter tolerances and more demanding service environments, those compromises are becoming increasingly difficult to accept.

Friction stir welding (FSW), pioneered by The Welding Institute (TWI) and enabled by Element Six’s (E6) advanced polycrystalline cubic boron nitride (PCBN) tooling, is now emerging as a proven, high-integrity and production-ready alternative for demanding heavy-duty steel applications.

Invented at TWI in the early ‘90s, FSW is already well established in aluminium fabrication, whereas until recently steel had remained a technical challenge due to the material’s extremely high melting point, as the process demands extreme tool durability, tight thermal control, and precise material flow management. FSW steel requires tools that are strong and stiff at temperatures of over 1,000 ⁰C, while simultaneously being resistant to oxidation, chemically stable even in contact with hot iron and resilient against the high bending and fatigue loads imposed upon them. The collaboration between TWI and E6 is now opening up FSW to heavy steel fabrication through the use of E6’s innovative PCBN tools integrated in TWI’s POWERSTIR platform.

Why heavy-duty steel needs a new approach

In many heavy-duty steel applications, arc and fusion welding can deliver acceptable welds, but only at the cost of high heat input, multiple passes and extensive rework. For thick plate and high-alloy steels, this often results in:

  • Significant distortion requiring straightening, machining or re-fabrication.
  • High residual stresses, that can compromise fatigue life and in-service reliability.
  • Increased inspection and qualification effort, adding time and cost to projects.

These challenges are even greater for cryogenic steels. For example, 9% nickel (Ni) must remain tough at extremely low temperatures for applications such as liquified natural gas (LNG) storage and low-temperature energy carriers. Conventional welding of nickel alloys requires filler metals and strict controls on heat and microstructure. This makes the process more complex, expensive and risky for storage tanks and related infrastructure.

FSW offers a fundamentally different approach – a solid-state joining route that minimises peak heat input, reduces defects, and delivers weld properties closer to those of the parent material. This combination is highly attractive for heavy-duty structures where integrity, consistency and productivity are critical.

 

How FSW works and the role of E6’s PCBN tools

 

FSW is a solid-state joining process in which a rotating, non-consumable tool is plunged into the joint line between two plates and traversed along it. Frictional heating results in plasticisation, softening the steel around the tool without melting it. The tool’s shoulder and pin then forge the softened material together, forming a consolidated joint with a high-quality weld, refined microstructure, low defect rates and minimal porosity.

Welding steel imposes extreme thermal and mechanical demands on tooling, such as hot temperatures, high forces, severe wear, and stability requirements, making the FSW tool material and geometry critical determinants of weld quality, consistency and economic viability.

E6’s PCBN tools are engineered specifically to meet these challenges and withstand the high thermal and mechanical loads of steel FSW. PCBN combines extremely high heat hardness with excellent wear resistance and thermal stability, enabling tools to withstand the temperatures and loads encountered during welding of steels and high strength alloys, while maintaining dimensional stability and process control. By overcoming the heat, wear and stability limitations that typically constrain steel FSW, E6’s PCBN tools enable consistent weld formation, extended tool life and lower cost per metre of weld.

This single pass technology is now being used for thicker sections and tougher steel grades, opening up new applications that weren’t possible or practical with older, more conventional processes or earlier generation tools.

 

Welding a 25 mm steel plate

A recent successful collaboration between E6 and TWI has demonstrated the capability to weld a 25 mm thick steel plate. Using a sequential dual ‑spindle approach, this marks a significant step in the industrialisation of steel FSW for heavy ‑duty plate fabrication.

Welding 25 mm steel typically requires multiple passes with traditional welding processes, high heat input and extensive distortion management, with corresponding impacts on productivity and rework.

To overcome these challenges, FSW is implemented from both the top and bottom in carefully managed stages, using E6 PCBN tools on TWI’s POWERSTIR platform. This step-by-step approach allows operators to manage heat more effectively than welding both sides at once, helping prevent overheating and making it easier to achieve strong, reliable welds.

 

The benefits of this technology for heavy-duty fabricators include:

  • Reduced distortion and rework, particularly in thick sections, thanks to lower heat input and more uniform through-thickness heat distribution.
  • More consistent weld quality, significantly reducing traditional fusion welding defects (e.g. lack of fusion, solidification, cracking).
  • Potential to downgauge steel plate thickness, delivering lightweighting and cost savings while maintaining performance.
  • Greater automation and repeatability, supporting industrial-scale deployment for heavy-plate welding in sectors such as shipbuilding, large structures and heavy vehicles.

Nickel steels for cryogenic and energy transition applications

Nickel steels are essential for cryogenic storage and transport, especially for LNG and emerging low-temperature energy transportation. This is thanks to their combination of strength and toughness under cryogenic temperatures.

Conventional welding of 9% nickel steel is technically and commercially demanding. It relies on costly nickel-based filler metals and strict, carefully managed procedures to keep the steel tough at low temperatures. That all adds cost and complexity for building storage tanks and related infrastructures.

FSW’s solid-state nature offers an attractive route to reliably and cost-efficiently join 9% Ni steels while limiting heat input and microstructural degradation, consequently preserving cryogenic performance in the joint.

E6’s PCBN tooling has been in-field validated across a range of steel types, including challenging and dissimilar joints, providing the high-temperature hardness and wear resistance needed to weld 9% Ni successfully and reliably.

As more trials are completed, pairing FSW process control with E6’s trusted PCBN tools is elevating this technology as the most reliable choice for cryogenic storage and distribution in LNG and future low-carbon fuels.

 

What this means for welding engineers, production leaders and fabricators

  • FSW provides a high-integrity, repeatable alternative to conventional welding in heavy-duty and cryogenic steels.
  • E6’s PCBN tooling is a key enabler, making steel FSW practical at an industrial scale by delivering the durability, dimensional stability and process control needed for consistent, economically viable production.
  • The process supports improved quality, reduced rework, and greater automation, aligning with industry priorities around productivity, workforce challenges and digitalised fabrication.
  • Adoption is accelerating as equipment, process understanding and tooling mature, giving stakeholders greater confidence to specify and deploy FSW in critical applications.

Looking ahead, E6 will continue to work with its wider ecosystem of industrial partners and end-users. This will be essential to expanding the process window and adoption of FSW of steel to support the heavy-duty sector’s productivity, reliability and decarbonisation goals.

As equipment capability and process understanding continue to advance, PCBN-enabled FSW is moving from specialised application to a viable scale production technology for heavy-duty steel. For fabricators facing increasing pressure on cost, quality and sustainability, the question is no longer whether FSW is feasible, but where it will deliver the greatest advantage.

www.e6.com

By Published On: September 7th, 2026Categories: TechnologyComments Off on Transforming next-generation heavy-duty steel applications