Corewire products are designed for general hardfacing, repair and maintenance. Used extensively in the mining, quarrying, cement, agriculture, steel and rail industries amongst others, the experts are Corewire help us look at the advantages of flux cored wire vs solid wire when hardfacing.

Hardfacing, also known as hard surfacing, surface welding, or cladding, is a metalworking process that involves welding a harder material onto a base metal to make it more durable and resistant to wear, impact and abrasion.

Hardfacing by the MIG/MAG process can be achieved by either using solid wire or flux cored wire. Here, we will investigate the benefits of using flux cored wire against solid wire.

 

Deposition rates

A 1.2 mm solid wire will have a deposition rate of 3.6 kg to 4.5 kg per hour for a standard hard-facing wire.

By comparison, Corewire’s  1.2 mm range of flux cored wires have deposition rates of 5.4 kg to 6.4 kg per hour resulting in increased productivity.

Lower fume generation

With the management of welding fumes at the forefront of the concerns faced by the welding industry any reduction in fume generation is an advantage to the end user.

Weld deposit

The outer metallic sheath of a cored wire conducts the electrical current for welding. Because of the fabricated, composite nature of cored wires, their current carrying density is greater, which improves deposition rates at equal current levels when compared to solid MIG wires.

Weld Characteristics

This results in the ball transfer of cored wire that disperses larger molten metal drops or balls, this type of transfer promotes low penetration and dilution suitable for hard-facing.

Range of metallurgical compositions

The range of solid wire metallurgical compositions is limited compared to those possible with a flux cored wire. This is due to the flexibility and control of being able to add and mix the alloying elements in flux cored wires that make up the weld deposit. This is not possible with solid wires.

 

Conclusion

For hardfacing applications Corewire flux cored wires have the following key benefits over solid wire:

  • Up to 42% less fume generation
  • Up to 30% higher deposition rate
  • Less dilution, producing higher weld metal hardness
  • Less penetration, resulting in less rework
  • Larger range of compositions available

Business Development Manager, Adrian Leek, says: “Any company looking to extend the operational life of its hardfaced products can contact us for a demonstration on 01252 517766 or email us at info@corewire.com.”

www.corewire.com

By Published On: January 9th, 2025Categories: TechnologyComments Off on Flux cored wire offers hardfacing advantages