
Several industrial welding applications require pre-heating of the workpiece before welding, particularly with metals such as copper or brass that have a lower thermal conductivity than more commonly used metals like steel or aluminium. Without efficient pre-heating, poor fusion and warping can occur, leading to a weak and unsightly weld.
When it comes to traditional methods such as Oxyacetylene gas, pre-heating can take a long time, especially in scenarios where the material is thick, brittle, or being welded in cold or freezing environments. This way of heating is expensive to run and is outdated by modern standards.
Induction heating is the new standard in this regard; GYS, as one of the leading manufacturers of induction heating equipment, offers a wide range of solutions for industrial and non-industrial applications with the Powerduction range, made in France. From 1.2 to 22 kW of output across single and three-phase power supplies, these units are designed to rapidly heat metal to the core, and in a much more cost-effective and safe way, also requiring no training to use.
Real-World Success Stories of Improved safety and gas cost savings
Founded in 1970, Lancashire-based Harrisons Engineering specialises in heavy fabrication, including large steel structures such as bridges, buildings and girders. The company needed to pre-heat 35 to 50 mm steel joints before welding, which was previously done using traditional Oxyacetylene gas torches. This was a timely process and also raised concerns around costs and employee safety when operating the torch.
The GYS Powerduction 220LG, an extremely powerful 3-phase 22 kW unit, was the solution to this issue – the company found that the efficiency and greatly improved rate of heating to be highly beneficial. Thanks to the flagship unit’s built-in liquid cooling, technicians could continually heat metal at maximum power for extended periods.
The outcome was a drastic reduction in time required to heat the workpiece, and money saved on gas bottle rental and workshop insurance costs; These are benefits that just don’t come with the use of traditional gas torches.
Reducing heating time from over an hour to just 7 minutes
A major steel manufacturer with multiple sites across the UK has also enjoyed the benefits of GYS induction heating technology. The challenge of pre-heating 25 to 35 mm copper plates called for an innovative solution and, for safety reasons, there was a strictly enforced no-flame policy in the workshop, meaning gas torches were not permitted.
Again, the flagship GYS Powerduction 220LG, this time using a unique spiral inductor head attachment, was the answer to this problem. The spiral head proved particularly effective for heating copper, with its design enabling much faster activation of the material at a particle level when compared to other methods.
The outcome was a large reduction in time required for pre-heating, from over an hour down to just 7 minutes – streamlining the whole process in the workshop.
Complete pre-heating in 30 seconds
Lastly, a Preston-based forge has also seen the advantages of induction heating over Oxyacetylene gas – the company’s main challenge was using gas to pre-heat for forge welding, a process in which two pieces of metal are heated to white-hot temperatures and hammered together to be joined. This process was very lengthy and also raised concerns around the environmental impact of using gas.
The immense power output of the GYS Powerduction 220LG, as well as its 100% duty cycle at maximum power, hugely sped up the forge welding process, reducing the required pre-heat time from over 5 minutes to just 30 seconds.
GYS offers one of the most comprehensive ranges of induction heating machines on the market, with the added ability to manufacture bespoke inductor heads for any industrial application or need. A national team of technical sales engineers are also on hand to provide expertise and product demonstrations upon request.
www.gys-welding.com








